Head Track Setup on RC8X & DJI FPV Goggles.
We need to buy a head track module online. The module outputs in channel 6, channel 7 and channel 8 by default.
We show the head track function with the 2 axis gimbal, with one servo connected to channel 6, and other to channel 7. (Note: RC8X supports 3 axis gimbal. When using a 3 axis gimbal, connect it to channel 6, 7, and 8; when using a 2 axis gimbal, connect it to any 2 channels of channel 6, 7, and 8.)
Set in RC8X. Enter System menu– External input output– The goggles output PPM signal to the transmitter, so please set the protocol output mode to PPM_IN.
There are two cables in the head track module. One is for power supply, the other is for PPM signal. Connect the cable to DSC port of RC8X. Power on the head track module. And then power on the receiver.
Move the dji goggles, there is servo display in the transmitter.
If you mount a camera on the gimbal, then you can go out to enjoy the first-person view.

For more details of RadioLink RC8X:

RadioLink RC8Xの商品ページ:

You can send mails to after_service@radiolink.com.cn if you have any questions during using our products.

#fpvracing #fpv#dji #rctransmitter #radiolink #rc8x#trending#challenge

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *